RHBS Select Series Launch by RAB Design
We are pleased to introduce the new RHBS-LED Select Series of Round Highbay fixtures.
The RHBS is durable, easy to install and with colour and lumen selectable switches, you can be ready for any job, any time!
Features:
4 Selectable Models in 2 sizes:
RHB1S-LED100A60 – Adjustable from 100W, 80W, 60W
RHB1S-LED150A100 – Adjustable from 150W, 120W, 100W
RHB2S-LED200A150 – Adjustable from 150W, 180W, 200W
RHB2S-LED240A220 – Adjustable from 200W, 220W, 240W
Colour Selectable (4000K/5000K CCT)
Lumen Adjustable (3 Wattage Settings)
Now available in 120-277V. 120-347V coming soon.
Ruggedly Designed – Die Cast Aluminum Housing, PC lens, 3G Vibration Tested, IP65, Approved for Wet Locations.
Quick Install – Mounting hook, 2 meter power cord, 0.5 meter dimming cord easy to access without the need of opening the fixture or cutting the cable.
Control it all from the tips of your fingers
RHB1S/RHB2S DC MOTION SENSOR REMOTE CONTROL
Button | Function |
---|---|
ON/OFF | Long press until the brightness indicator light is on. Then press to permanently turn on and off the fixture. |
BRIGHTNESS | Sets the highest light fixture brightness when motion is detected. |
SEND | Uploads the selected remote-control parameters to the light fixture sensor. |
HOLD TIME | The time the light fixture will remain at the brightness setting after it detects motion. |
STAND-BY DIM | The Dim level that the light fixture will dim down after the Hold Time has expired. |
STAND-BY TIME | The time the light fixture will remain in the Stand-by dim state before it shuts off. To disable the light from shutting off, select the INFINITY icon. |
SENSITIVITY | Sets the sensitivity to which the sensor will detect motion. |
DAYLIGHT | The lux setting that the light fixture will turn on/off. If the ambient lux is more than the defined lux setting, the fixture & sensor function will turn off and remain off until the ambient lux is below the setting. Long press until the daylight indicator light is on. Then press to select the desired lux setting. |
RESET | Resets the light fixture sensor parameters to the default settings. |
- / + | Press to increase or decrease brightness from 0% to 100%. |
TEST | Press to test the sensor (hold time is only 3s). |
Over 50 Years of Lighting Excellence In Canada.
At RAB Design Lighting, we pride ourselves on creating practical lighting solutions for the Canadian contractor. We work closely with contractors to create products that ease on the job installation pains, are engineered to perform, and built to last in extreme Canadian conditions.